Javatpoint Logo
Javatpoint Logo

Differentiate between Circuit Switching, Message Switching, and Packet Switching

Introduction

Switched communication networks route data between a number of intermediate nodes as it travels from source to destination. Nodes accomplish data transmission between certain locations on a network via a mechanism called switching. The three typical switching methods are as follows:

  1. Circuit Switching
  2. Packet Switching
  3. Message Switching

In this topic, we will discuss the three types of switching methods and also differentiate between them.

Types of Switching Methods

1. Circuit Switching

When constructing a telecommunications network circuit, switching is a technique in which two network nodes first establish a specialized communications channel (circuit) within the network before corresponding with one another. The circuit assures the channel's full bandwidth and maintains connectivity throughout the communication session. The circuit acts as though the nodes were physically connected, exactly like an electrical circuit.

When a dedicated circuit was formed between two phones for the duration of a call by the network in analog telephone networks, circuit switching was first employed. In contrast, trunklines between switching centers in message switching and packet switching systems used in modern digital networks transport data between several nodes in the form of data packets without the use of dedicated circuits.

A circuit-switched network's basic example is the early analog telephone network. The telephone exchange switches establish a continuous wire circuit between the two phones whenever a call is placed from one phone to the other, lasting throughout the call.

Differentiate between Circuit Switching, Message Switching, and Packet Switching

As contrasted to packet switching, where packet queues may result in variable and potentially endlessly long packet transfer delays, the bit delay in circuit switching remains constant throughout a connection. No circuit can be compromised by competing users since it is shielded from use until the circuit is released and a fresh connection is established. The channel is still restricted and shielded from rival users, even if no communication is actually happening.

Although circuit switching is typically used to connect voice circuits, the concept of a dedicated conduit being constant between two communication parties or nodes can be expanded to communicate material other than voice. The benefit of employing circuit switching is that it offers continuous transfers without the overhead associated with packets, maximizing the utilization of available bandwidth for that connection. Its potential for being relatively inefficient comes from the fact that other connections on the same network cannot utilize unused capacity pledged to a connection. Furthermore, if the circuit is disrupted, calls are not possible and will be dropped.

2. Message Switching

Before packet switching was discovered, a method called message switching was created as a complement to circuit switching. By communicating through messages that contain the entire amount of information to be transmitted, end users converse through message switching. A message is the most basic form of a unit.

Differentiate between Circuit Switching, Message Switching, and Packet Switching

The sender and receiver do not have a direct connection. Many intermediate nodes are involved in data transport and making sure the message gets to its designated location. Thus, message-switched data networks are sometimes known as hop-by-hop systems.

They offer two separate and significant qualities:

  • Store and forward: The intermediate nodes are in charge of sending the whole message to the following node. As a result, each node needs to have storage space. If the following hop and the link that connects them are unavailable, a message won't be delivered and will instead be kept indefinitely. A store-and-forward switch will only forward a message if there are enough resources and an accepted next hop. The store-and-forward property is what is meant by this.
  • Message delivery: Delivering a message entails transmitting data from the source to the destination node while enclosing it all in a single message. The source and destination of each message must be included in the header, which also carries the message routing information.

Characteristics of Message Switching

The benefit of message switching is that it makes it possible to use network resources effectively. Additionally, traffic may be easily regulated and monitored because of the store-and-forward functionality of intermediary nodes. Another advantage is the delivery of messages as a whole rather than in pieces.

Message switching, however, also has certain drawbacks. Switches need a lot of storage space since messages are perpetually held at each intermediate node. They move very slowly as well. This is due to the fact that each node must wait until it has received the complete message before processing the next node and any linkages to it, which depends on channel traffic and availability. The use of message switching in real-time or interactive applications, such as video conferences, is therefore not possible.

3. Packet Switching

Small bits of data are moved between networks through a process called packet switching. These data "chunks" or "packets" allow for quicker, more efficient data transmission.

Normally, when a user transmits a file across a network, it is sent in fewer data packets rather than all at once. As an illustration, a 3MB file will be separated into packets, with the header of each packet providing the sequence number, the origin IP address, the destination IP address, the number of packets in the full data file, and the number of packets in the file.

Differentiate between Circuit Switching, Message Switching, and Packet Switching

The two main categories of packet switching are:

1. Connection-less packet switching: Each packet in this traditional form of packet switching is routed separately. As a result, each packet has complete routing information. The shifting loads on the network's nodes (adapters, switches, and routers) also make it possible for different transmission techniques and out-of-order delivery. Datagram switching is another name for this form of packet switching.

In connectionless packet switching, the header section of each packet contains the following data:

  1. Source address
  2. Destination address
  3. Total number of packets

Sequence number (Seq#) for reassembly

The receiving devices rearrange the packets once they have arrived at their destination via numerous paths to create the original message.

2. Connection-Oriented Packet Switching: The data packets are assembled before being numbered in connection-oriented packet switching. It is also known as virtual circuit switching or circuit switching. They then go consecutively along a predetermined route. Since all packets are sent in order while using circuit switching, address information is not required.

Difference between Circuit Switching, Message Switching, and Packet Switching

Parameters Circuit Switching Message Switching Packet Switching
1. Dedicated Path There is a dedicated path in circuit switching There is no dedicated path in message Switching There is no dedicated path in packet switching
2. Connection By establishing a dedicated path between the source and destination, connection is made possible. Between each node along the route, a link is individually generated. Between each node along the route, a link is individually generated.
3. Routing Between the source and the destination, there is just one dedicated path. Messages travel a separate path to their destination. To carry the destination, packets take an autonomous path.
4. Data Segmentation Entire message Entire message Into Packets
5. Routing Flexibility There is no routing flexibility in Circuit Switching There is limited Routing flexibility in message switching There is Routing flexibility in Packet switching
6. Bandwidth Reservation Yes No No
7. End Terminal Telegraph, Teletype Telephone, modem Computer
8. Addressing scheme Geographical addresses Hierarchical numbering plan Hierarchical address space
9. Data Transmission Real-time Non-real-time Both Real-time and Non-real-time
10. Network Resource Efficiency There is low Network Resource Efficiency(dedicated path) There is low Resource Efficiency(per message) There is high Resource Efficiency(Shared)
11. Multiplexing Scheme Character message multiplexing Circuit multiplexing Character multiplexing shared media access networks
12. Examples Traditional Telephone is an example of Circuit Switching Telex Systems is an example for Message Switching Internet and Ethernet are examples for Packet Switching

Conclusion

In conclusion, the paradigms of circuit switching, message switching, and packet switching each offer a unique approach to data transmission. Circuit switching, which is best demonstrated by conventional telephone networks, offers a dedicated and dependable connection for the duration of a session, making it appropriate for real-time voice communication. Despite being flexible in managing messages of varying lengths, message switching can be less effective because it requires storing and forwarding whole messages. On the other side, packet switching, the foundation of contemporary data networks like the internet, excels at effectively utilizing bandwidth, handling a variety of data formats, and facilitating real-time and bursty data transfer. As technology advances, packet switching has become the dominant and adaptable technique for fulfilling the needs of modern communication networks, enabling the frictionless interchange of information across the globe. Due to its adaptability to different data formats and effective use of network resources, packet switching has significantly favored the expansion of communication networks.


Next TopicWhat is Web 3.0





Youtube For Videos Join Our Youtube Channel: Join Now

Feedback


Help Others, Please Share

facebook twitter pinterest

Learn Latest Tutorials


Preparation


Trending Technologies


B.Tech / MCA




news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news
news